Coccydynia is a word that literally means “tailbone pain,” and there are several causes. Usually there was a prior injury, like abruptly falling onto the tailbone, that results in persistent pain at the bottom of the spine. The pain could have started right at the time of the fall, or could slowly progress to become painful months or even years after the event. Very often the spinal joints above (at the lumbar spine) can refer pain down into the tailbone, or the ligaments that attach to the tailbone can become irritated.

Either way, the tailbone is usually painful to direct pressure at the end of the spine. People may slump way down in the chair to move the pressure to the back of the pelvis (onto the sacrum). Unfortunately, that posture puts the lower back into more forward bending, and may worsen symptoms later.

Standing can relieve pain by eliminating the tailbone pressure from the chair and possibly improving spinal posture. Regular standing is not a completely desirable solution either—medical studies on increased standing at work report greater risk factors for atherosclerosis and heart disease(1,2). Standing and walking the greater part of the day will also nearly double the likelihood to be hospitalized for varicose veins(3). A recent study showed surprising improvement in productivity and a significant improvement in neck and low back symptoms with very little standing—using work-break software for brief posture changes made a significant difference whether people used a sit-stand workstation or a conventional sitting work station(4).

Seating Posture Matters

How we sit in the chair makes a big difference for how the whole body works, and it’s smart to look more closely at sitting posture. Chairs that only lean backward may not be best when work moves the body forward.

Photograph 1 - Neutral spine

Photograph 1 – Neutral spine

 

Photograph 2 - Spinal collapse

Photograph 2 – Spinal collapse

Photographs 1 and 2. The top image shows the reclined sitting posture with good spine posture and low disc pressure compared to standing. The bottom image shows the same chair adjustment, but when the body moves forward the spine bends into the very worst posture, nearly doubling disc pressures in the low back, and increasing risk of long-term spinal problems.

Sometimes people will try to sit well even if the chair does not support them. Perched posture (Photograph 3) is an easy way to sit upright in a chair that only leans back, but imagine what that posture will do to tailbone pain! A chair with a forward tilt (Photograph 4) may support good spine postures better when the work is forward, because the pressure is carried through more of the thigh while the spine is upright.

Photograph 3 - Perched seating

Photograph 3 – Perched seating

 

Photograph 4 - Balance spine

Photograph 4 – Balance spine

Photographs 3 and 4. The top image shows the “perched” sitting posture when the user chooses good spine posture, but works harder without back or leg support. Can that posture be a cause of tailbone pain? The lower image shows forward work with the balanced spine actively supported by the legs, full thigh support on the chair, and the work surface provides full forearm support for forward tasks so forward, upright sitting postures are easier.

Some chair manufacturers, like Office Master, have chairs with fully adjustable seat pan angles, and there are options to modify the seat pan with a cut-out in the upholstery to relieve direct pressure on the tailbone.

Adjustable Seat Pan

When sitting away from the office, like in the car or home, the seat can be modified with a wedge cushion that provides relief for the tailbone, which may help improve sitting tolerance. One example of a seat cushion is the Jobri BetterBack Sacro Wedge.

Jobri Betterback Sacro Wedge

Jobri Betterback Sacro Wedge

Interestingly, the wedge cushion also helps move the body forward like the seat pan tilt mechanism in some adjustable chairs to relieve forward bending on the lumbar spine, which is the common problem for sitting.

There’s something wrong if it hurts to sit

Looking closely at how the chair and workstation position the spine is an important component of a good ergonomic evaluation, and the solution should offer relief. Even a perfect workstation may not resolve the problem, and a medical professional like a doctor or physical therapist should be able to offer effective treatment when there is a simple mechanical cause.

John Fitzsimmons is a Certified Industrial Ergonomist and a Physical Therapist skilled with treating musculoskeletal injuries. He is the principal consultant for Ergonomics First, Inc.

References:

  1. Krause, N, et al, (2007). Occupational activity, energy expenditure and 11-year progression of carotid atherosclerosis. Scandinavian Journal of Work and Environmental Health 33, 405-424
  2. Krause, N, et al, (2000). Standing at work and progression of carotid atherosclerosis.  Scandinavian Journal of Work and Environmental Health 26, 227-236.
  3. Tüchsen, F, Hannerz, H, Burr, H and Krause, N (2005). Prolonged standing at work and hospitalization due to varicose veins: a 12-year prospective study of the Danish population. Occupational Environmental Medicine 62; 847-850
  4. Davis K., Kotowski S, 2014. Postural variability: an effective way to reduce musculoskeletal discomfort in office work. Human Factors (56) 1249-1261